Skip to main content

Main Windows Part 5

 All of the windows are in, and I'm starting to sand and paint the trim.  Exterior still needs some cover trim, and is still the primered white color, that will all be painted to match the same dark color.


I added some Costco LED string lights to and existing circuit, and strung them between the rafters outside.  Not sure if I'll keep them or not, looks a bit messy when they are off, but it's pretty when they are on.
Also finally patched the original stove vent hole, and the smaller plumbing hole in the ceiling.  Filled it with foam so that it was properly insulated and then glued and nailed in replacement wood after cutting the rough round hole into a clean square hole.  The plumbing hole I just filled with a round plug I filed down to fit.
That will all get filled, sanded, and then painted.


Comments

Popular posts from this blog

Figuring out a plan for the sunken area, cleared it all out.  Will likely need to deal with the chimney first.

Ugly Float and Tape

Getting started on the float and tape job on the upstairs half bath.  Pretty ugly so far. This is just the first coat, which is really intended to just get the tape down.  Looks ugly, but it's actually not bad.  Won't know for sure how it will look till the last coat.  Plan is to do a texture-free level 5 finish.  Not sure if I'll be able to pull it off or not, worst case if it doesn't pan out I can just throw some texture up.

Bathroom Waterproofing

Waterproofing the shower.  1 primer coat, 5 coats on the walls, 7 on the pan.  Tested and approved by the inspector.  Next is upper pan and then tile.